Gaseous Sampler: (TG-004)


Gaseous Sampler: (TG-004)
Technogroovyy TG-004 gaseous additives are designed to control gaseous pollutants like SO2, NO2, Cl2, H2S, NH3, etc In the su
rrounding air. The air taken from the sample is absorbed with suitable reagents that absorb certain gas pollutants and wet standard analysis. The chemical methods TG-004 are an improvement over the commercially available TG-004 with the following main characteristics:
 The main and differential properties:
• Improved thermoelectric cooling system to keep impingers cold without any ice
• The sampling train has been adjusted according to current requirements
• Using impingers with fringe discs for less soluble gases
• Digital flow sensor replaces the old rotational scale.
• Added play mode to allow long playback times without replacing degraded media

Technical Specifications
  • Absorbers Provided : 2 Nos. of 35ml borosilicate glass impingers as per BIS 5182 (Part 6) 2006 and 1 fritted disc impinger placed in thermoelectrically cooled tray.
  • Sampling Rate of each Impinger : 0.2 -2.0 lpm measured using digital flow sensor.
  • Sampling Train : A Manifold having three inlets and one outlet with built in needle valves for flow control of each inlet
  • Sampling Time : 28 hours (maximum)
  • Sampling Time Record : 0 to 99:59 (99 hours and 59 minutes).
  • Automatic Sampling Control : 24 hr programmable timer to automatically shut off the system after preset interval.
  • Compositing Mode of Operation: Programmable pump operation with ON & OFF period controllable from 1 to 99 minutes
  • Sampling Pump : Diaphragm pump with 6LPM free flow rate and 15CM of Mercury pressure
  • Power Requirement : Nominal 220v, single phase 50 Hz AC, 150 watts.


Thanks & Regards
 (Technogroovy)
Mail Id: technogroovy@gmail.com
Mob: +91-8218470498,+91-8860277055

Comments

Post a Comment

Popular posts from this blog

High Volume Air Sampler

Image
Overview: Technogroovy's high-volume device is an essential device primarily used to measure the concentration of suspended particles in air. By definition, the suspended particles are very small, have a noticeable rate of decline, and are likely to remain in the atmosphere for significant periods of time. The size of these particles usually ranges from approximately 1    to 100 μm. The total suspended particulate sampler or the TSP large volume air sampler is used to collect the total suspended particulate matter in the surrounding air, where size selection is not preferred. EPA reference method. United States of America For the TSP group.    Technogroovy's high-volume air sampling collects particles at a flow rate of 40-60 feet   during a continuous sampling period. The TSP oversized air sample is used to determine the total suspended particle concentration or can be used to determine the particle identity. Technogroov's oversized air samples come...
Read more

Dioxine Stack Sampler

Image
Gaseous and particulate are dynamically removed from the emission source and collected in a multi-component sampling train. The group's components consist of a fiberglass filter and two sets of glassware called the front half and the back half.The front half consists of a group of glass nozzles, a probe covered with heated glass, the front half of the filter holder with the filter.The back half includes a back half filter stand, insulated PTFE sample transfer tube, condenser coil and solid absorbent unit. Technogroovy Dioxine Stack Sampler   contains all the components required to form the back half of the assembly equipment. Technogroovy manufactures all components of the front half glassware, including the glass openings, the heated glass-lined probe (, the heated filter box, and the insulated PTFE sample transport tube). Technogroovy also makes the entire stand holder and also supplies the filter. Technical Specifications: Stack Temperature Range   : Ambient to...
Read more

Technogroovy Cone Calorimeter

Image
Technogroovy Cone Calorimeter : Heat release amount is the center parameters to assess the fire conduct of materials and items. Technogroovy's Cone Calorimeter can fulfill every current rule. Cone Calorimeter manufacturered by Technogroovy incorporates these frameworks, for example, heat discharge, mass misfortune, smoke age, and so forth, and permit clients to purchase the parts they need individually and include into a similar chamber. This adaptable component is one of it's points of interest. Technogroovy Cone Calorimeter test hypothesis depends on the rule that the consume calories is relative to the measure of oxygen's consumption,1KG oxygen utilization will deliver 13.1 MJ heat. Test gas heat outflow, start timing, oxygen utilization rate, CO/CO2 age rate, the gas stream will be estimated all.What's more, clients can likewise change the example temperature, or alter the temperature rise time to test, in the wake of setting up the virtual temperature at ge...
Read more