Technogroovy Respirable dust Collectors/Sampler


Application:
Respirable  dust collectors are used for routine monitoring of PM10 in the surrounding air. The model has been made easier to use by providing an overnight operation lighting system, tool box inside the tool, soft handle and lockable top cover. The cabinet design is optimized to prevent rain and dust from entering the machine. With this device, sensitive particles can be measured correctly and TSPM can also be evaluated from the set of dust placed in a cyclone cup.
Working Principle:
This sampling device uses an improved cyclone with a more severe cut  to separate the rough flow from the air stream before filtering it onto a microfiber glass filter. Community maintenance and inconvenience efforts. The brush sample blower also reduces the audible noise.
Features:

•            Brushless blower reduces equipment downtime and maintenance effort.
•            Significantly reduced Noise
•            Electromagnetic Interference (EMI) to TVs totally eliminated.
•            Provision of light for flow and time reading during night
•            Toolbox within the instrument
•            Lockable casters for field convenience.
•            Lockable Top cover and Gaseous attachment
•            Improved cabinet design which is more sturdy and durable with SS hardware

Technical Specification :

•            Flow Rate  : 0.9 – 1.4 m3 /min free flow
•            Particle Size : Particles of 10 microns & below collected on Filter Paper holder. SPM bigger than 10 microns collected in a separate sampling bottle under the cyclone
•            Sampling Time  :   28 hours (maximum)
•            Sampling Time Record  :   0 to 9999.99 hrs recorded on a Time Totalizer
•            Automatic Sampling  : 24 hrs programmable timer to automatically shut off the system after pre set time interval.
•            Stabilizer  ; Voltage stabilizer to compensate voltage fluctuations
•            Power Requirement  :  Nominal 220 V (+/- 10), Single Phase, 50Hz AC mains supply
•            Size & Weight  : 430 x 320 x 930 mm, 45Kg


Thanks & Regards
 (Technogroovy)
Mail Id: technogroovy@gmail.com
Mob: +91-8218470498,+91-8860277055

Comments

  1. AshwiniMay 4, 2022 at 9:44 AM

    very informative post .Thanks for sharing post
    Climatic Test Chambers

    Environmental Chambers for simulation of conditions like temperature, humidity, corrosion, dust and rain to be used for various tests.Jost's provide the latest generation of Climatic Test Chambers with innovative technique and future-oriented design.
    Automotive Test Benches

    ReplyDelete

Post a Comment

Popular posts from this blog

High Volume Air Sampler

Image
Overview: Technogroovy's high-volume device is an essential device primarily used to measure the concentration of suspended particles in air. By definition, the suspended particles are very small, have a noticeable rate of decline, and are likely to remain in the atmosphere for significant periods of time. The size of these particles usually ranges from approximately 1    to 100 μm. The total suspended particulate sampler or the TSP large volume air sampler is used to collect the total suspended particulate matter in the surrounding air, where size selection is not preferred. EPA reference method. United States of America For the TSP group.    Technogroovy's high-volume air sampling collects particles at a flow rate of 40-60 feet   during a continuous sampling period. The TSP oversized air sample is used to determine the total suspended particle concentration or can be used to determine the particle identity. Technogroov's oversized air samples come...
Read more

Dioxine Stack Sampler

Image
Gaseous and particulate are dynamically removed from the emission source and collected in a multi-component sampling train. The group's components consist of a fiberglass filter and two sets of glassware called the front half and the back half.The front half consists of a group of glass nozzles, a probe covered with heated glass, the front half of the filter holder with the filter.The back half includes a back half filter stand, insulated PTFE sample transfer tube, condenser coil and solid absorbent unit. Technogroovy Dioxine Stack Sampler   contains all the components required to form the back half of the assembly equipment. Technogroovy manufactures all components of the front half glassware, including the glass openings, the heated glass-lined probe (, the heated filter box, and the insulated PTFE sample transport tube). Technogroovy also makes the entire stand holder and also supplies the filter. Technical Specifications: Stack Temperature Range   : Ambient to...
Read more

Technogroovy Cone Calorimeter

Image
Technogroovy Cone Calorimeter : Heat release amount is the center parameters to assess the fire conduct of materials and items. Technogroovy's Cone Calorimeter can fulfill every current rule. Cone Calorimeter manufacturered by Technogroovy incorporates these frameworks, for example, heat discharge, mass misfortune, smoke age, and so forth, and permit clients to purchase the parts they need individually and include into a similar chamber. This adaptable component is one of it's points of interest. Technogroovy Cone Calorimeter test hypothesis depends on the rule that the consume calories is relative to the measure of oxygen's consumption,1KG oxygen utilization will deliver 13.1 MJ heat. Test gas heat outflow, start timing, oxygen utilization rate, CO/CO2 age rate, the gas stream will be estimated all.What's more, clients can likewise change the example temperature, or alter the temperature rise time to test, in the wake of setting up the virtual temperature at ge...
Read more