Technogroovy Corona Covid19 Disinfection Chamber /Tunnel


Technogroovy
A 215- Okhla Industrial Area
Okhla ,New Delhi 110040                                                      Web: www.technogroovy.co.in,www.technogroovy.in
Contact-+91-821847498,+91-8860277055                             Email:technogroovy@gmail.com

Corona Disinfection Chamber :

Basically, Technogroovy’s  Corona Disinfection Chamber is a Door and passage type appealing tunnel in which different sides encased with PVC SHEETS and other two side are open for section and leave reason and this Corona Disinfection Chamber designed by Technogroovy is likewise encased with PVC SHEETS. At the point when human enters in the Corona Disinfection Chamber  , sensors which are put top focus and side focus detects human body and offers yield to the circuit and circuit gets initiated and entire Corona Disinfection Tunnel enacts and all sprayers gets actuated and beginning to shower towards focal point of the passage and all sprayers splashes on the human body and it will naturally stops following 10-15 seconds. Since 10-15 second is sufficient for Sanitization of Corona virus effect. At the point when Sprayer stops then human can exit from front side methods leave side. So this Corona Disinfection Chamber can purify 4-5 people in a moment and 250-300 people in 60 minutes.





Step by step instructions to working: Built a passage to shower representatives at a modern and government office complex with disinfectant before they start work.
The Corona Disinfection Chamber is outfitted with infrared locators that initiate a shower from sirs when an individual enters.

• Spraying low-concentration Disinfecting of Water mixture in machine
• Machine can mixing automatic.
Specification:
Fabriction Type: Stainless Steel / Steel Stretcher
Size: 1300/1300/2400 MM
Body Material: Pvc Sheets
Power: AC 220v 2 Amp Automatic Spray ( body sanitize & hand sanitizer)
Control : Automatic 10 Second



Thank You…

Comments

Post a Comment

Popular posts from this blog

High Volume Air Sampler

Image
Overview: Technogroovy's high-volume device is an essential device primarily used to measure the concentration of suspended particles in air. By definition, the suspended particles are very small, have a noticeable rate of decline, and are likely to remain in the atmosphere for significant periods of time. The size of these particles usually ranges from approximately 1    to 100 μm. The total suspended particulate sampler or the TSP large volume air sampler is used to collect the total suspended particulate matter in the surrounding air, where size selection is not preferred. EPA reference method. United States of America For the TSP group.    Technogroovy's high-volume air sampling collects particles at a flow rate of 40-60 feet   during a continuous sampling period. The TSP oversized air sample is used to determine the total suspended particle concentration or can be used to determine the particle identity. Technogroov's oversized air samples come...
Read more

Dioxine Stack Sampler

Image
Gaseous and particulate are dynamically removed from the emission source and collected in a multi-component sampling train. The group's components consist of a fiberglass filter and two sets of glassware called the front half and the back half.The front half consists of a group of glass nozzles, a probe covered with heated glass, the front half of the filter holder with the filter.The back half includes a back half filter stand, insulated PTFE sample transfer tube, condenser coil and solid absorbent unit. Technogroovy Dioxine Stack Sampler   contains all the components required to form the back half of the assembly equipment. Technogroovy manufactures all components of the front half glassware, including the glass openings, the heated glass-lined probe (, the heated filter box, and the insulated PTFE sample transport tube). Technogroovy also makes the entire stand holder and also supplies the filter. Technical Specifications: Stack Temperature Range   : Ambient to...
Read more

Technogroovy Cone Calorimeter

Image
Technogroovy Cone Calorimeter : Heat release amount is the center parameters to assess the fire conduct of materials and items. Technogroovy's Cone Calorimeter can fulfill every current rule. Cone Calorimeter manufacturered by Technogroovy incorporates these frameworks, for example, heat discharge, mass misfortune, smoke age, and so forth, and permit clients to purchase the parts they need individually and include into a similar chamber. This adaptable component is one of it's points of interest. Technogroovy Cone Calorimeter test hypothesis depends on the rule that the consume calories is relative to the measure of oxygen's consumption,1KG oxygen utilization will deliver 13.1 MJ heat. Test gas heat outflow, start timing, oxygen utilization rate, CO/CO2 age rate, the gas stream will be estimated all.What's more, clients can likewise change the example temperature, or alter the temperature rise time to test, in the wake of setting up the virtual temperature at ge...
Read more